DIGSBEXT4

The SB-EXT can be programed as servo ports or EXT (for connecting telemetry sensors). This unit is available for Jeti or Futaba radio systems, please select radio system when you order.

The connector on the left of the board connects to the EX Bus  port of the Jeti receiver (the connector  is a double connector, either one can be used).

This unit alows you to Extend up to 4 servos from the EX signal.

. Failsafe Hold or position

. can select any of the available channels from Jeti.

. can work directy with a SAT or REX receiver.

. unit is fully suported by Jeti and can be set thru the Explorer menu!.

Please observe that the servos connected to the SB-EXT get their power from the EX Bus connector from the receiver. You must therefore limit the current drawn or supply power to the servos externally.